1x
Press the programming button and, within 1
second, also press the DOWN button and hold the
two buttons down.
▻
The receiver confirms.
►
The programming run is completed.
Deleting the programming run on B-Tronic
radio receivers
Put the transmitter into master mode.
Select the receiver by pressing the button until the required receiver con-
firms.
All the following settings will then only be executed for this device.
Open/close the shading solution to a point
between the limit positions.
2x
Press the programming button and, within the
next 1 second, press the STOP button at the same
time and hold the two buttons down for 5
seconds.
▻
The receiver confirms.
►
The programming run is now deleted.
22
