background image

83

NAVIGATION MODE

>>>

The following settings are available.

>

Confirm your selection by pressing the

 button.

The Blocked roads button

In the 

Blocked roads

 settings window

you can unblock previously permanently
blocked roads (See "Blocking a section of
the road permanently" on page 130) o
r
modify the block (time and days of week
of block).

>

In the settings menu, press the

Blocked roads

 button. 

A window is displayed containing the
roads that have previously been blocked. 

Setting

Meaning

Show signs

 

Select whether speed 
limits are never 
displayed, always 
displayed or only 
displayed if the limit is 
exceeded. Furthermore, 
you can select whether 
the sign should blink 
when exceeding the 
speed limit, by selecting 

Always

 or 

If speed limit 

is exceeded

.

In city

 

Select the amount over 
the speed limit at which 
you would like to receive 
an acoustic warning 
within built-up areas. 

Out of city

 

Select the amount over 
the speed limit at which 
you would like to receive 
an acoustic warning 
within built-up areas.

Alert

An audible signal is to 
sound when exceeding 
speed limits.

Voice 
output

A speaker’s voice warns 
you of exceeding the 
speed limit.

Setting

Meaning

Note: 

To delete all blocked roads from the list,
press the 

Delete all blockings

 button

followed by the 

Yes

 button in the display

that then appears. 

Summary of Contents for active.5s EU






























































































































































Reviews: