Becker active.5s EU Operating Manual Download Page 137

Page: 137 / 157

137

SETTINGS

>>>

Setting the colour

You can change the colour of the icons
and other design elements.

Press the

Colour schemes

button.

Select one of the eight predefined
colours.

Select the required colour using the
slider

at the bottom of the display.

Confirm your settings by pressing the
back button

Language

The texts on the touch screen can be
displayed in a variety of languages.

Opening language selection

You can choose between the various
languages using the following button:

Press the

Language

button.

The language selection appears.

The language selection shows the
available languages in a list several
pages long. Each list field is in the form of
a button. Each button is labelled with the
language name and the associated
national flag.

Scrolling

Using the

buttons or the scroll

wheel, it is possible to scroll through the
list in the direction of the relevant arrow.

Selecting the language

Press the button for the required
language.

The selection is confirmed by pressing
the back

button.

The selection list for the voice is
displayed.

Using the

buttons or the

scroll wheel, scroll through the selec-
tion list.

Select a voice by touching the button.

Press the Back

button.

A prompt appears indicating that the
software has been re-started, and you
are asked whether you really want to
change the language.

Confirm the prompt using

Cancelling the language selection

Pressing the

Cancel

button cancels the

language selection and shows the
settings menu.

Note:

The colour of the button

corre-

sponds to the red colour set at the
factory.

Summary of Contents for active.5s EU






























































































































































Search results

Summary of Contents for active.5s EU

Reviews:

Related manuals for active.5s EU

Brands by name

Popular brands

Becker active.5s EU, Operating Manual

Search results

Summary of Contents for active.5s EU

Reviews:

Related manuals for active.5s EU

Brands by name

Popular brands