24
Do not use a silicon sealant to seal
the appliance against the aperture.
This will make it difficult to remove the
appliance from the aperture in future,
particularly if it needs to be serviced.
1. Place the bracket (B) over the holes
that match the size of the screws.
There are one set of screw holes in
each corner of the hob (H).
Slightly tighten a screw (C) through
the bracket (B) so that the bracket is
attached to the hob, but so that you
can still adjust the position.
2. Carefully turn the hob back over and
then gently lower it into the aperture
hole that you have cut out.
3. On the underneath of the hob, adjust
the brackets into a position that is
suitable for your worktop. Then fully
tighten the screws (C) to secure the
hob into position.
(A) SEALING STRIP
(B) BRACKET
(C) SCREW
AF Manual Placa Vitro Gás BECKEN BGH4446.indd 24
AF Manual Placa Vitro Gás BECKEN BGH4446.indd 24
21/08/2020 17:42
21/08/2020 17:42
