23
EN
Built-in Gas Hob | Encimera Vitrocerámica Gas | Placa Vitro Gás
Installing the appliance
• You must have a gap of at least 25 mm and at most 74 mm between
the underneath of the appliance and any surface that is below it.
1. Place the left/right pan
support on the glass next
to the nail.
2. Tear off the paper.
3. Stick the sponge around
the edge of the cut-out
hole.
1. Put the left/right pan
support on the glass
follow the nail
2. Put the middle pan
support between
them.
Follow the sequence below to install the pan support
- An oven must have forced ventilation to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut-out size must obey the indication.
Hole
Hole
Hole
Nail
Nail
Nail
Nail
Hole
AF Manual Placa Vitro Gás BECKEN BGH4446.indd 23
AF Manual Placa Vitro Gás BECKEN BGH4446.indd 23
21/08/2020 17:42
21/08/2020 17:42
