IPC@CHIP
®
DK55
Getting Started V1.0
2.2
Step 1 – Switching on the DB54 Development Board
The Development Kit DK55 is designed to give you easy access to the functionality of the
IPC@CHIP
®
SC23, especially to its several interfaces like serial ports, Ethernet, digital I/O,
CAN, USB, etc.
The following graphic gives an overview of the most important components of the DB54 board.
The AC power supply is delivered with country specific AC adapters. Please choose the right
adapter for your country. Then connect the AC power supply to your main supply and to the
DB54 Development Board to power it. The Power LED will light up.
2.3
Step 2 – Starting the IPC@CHIPTOOL
The IPC@CHIPTOOL is your communication centre for all IPC@CHIP
®
-based products. It
provides functionality for finding IPC@CHIP
®
s on the network, configuring them, updating their
RTOS, transferring files and using their shell.
For installing IPC@CHIPTOOL at your PC execute the Chiptool setup program
CHIPTOOL_INSTALL.EXE
from the Tools section of the CD or from the Getting Started
webpage. After the installation, you are able to start the IPC@CHIPTOOL application.
Copyright © 2007 Beck IPC GmbH
Page 4 of 35