IPC@CHIP
®
DK55
Getting Started V1.0
12. Close the wizard.
13. Open the
Windows Device Manager
by pressing the
Windows-key
+
Break
, switching to
the
Hardware
tab and pressing the button
Device Manager
.
14. Open the section
Ports (COM & LPT)
to check which COM port was assigned (e.g.
COM5).
15. Open the IPC@CHIPTOOL’s terminal and establish a connection via this COM port.
Please note that the Windows driver which handles virtual serial devices such as the
USB Terminal Emulation is not that robust. Avoid unplugging or restarting your DB54
while you have a connection established via the virtual COM port.
Copyright © 2007 Beck IPC GmbH
Page 17 of 35