IPC@CHIP
®
DK55
Getting Started V1.0
2.8
Step 7 – Configuring SD/MMC-Card
To use the enclosed SD/MMC-Card you’ll need additional driver software on the DB54, which
should be preinstalled at factory setting. Anyway, please follow these steps to verify that the
driver exists and is listed inside the
AUTOEXEC.BAT
file of the IPC@CHIP
®
’s internal drive.
The driver is available from the Getting Started section of the CD or from the Getting Started
website. The driver program needed with SD/MMC-Cards is named
EXTSD.EXE
. Extract this
EXE from the
EXTSD_DB54.ZIP
archive.
Important: If you have downloaded the newest driver from the internet Getting Started
webpage, you probably need to recompile the driver project in the subdirectory
EXTSD\PARADIGM24
. Disable the define
DK60
and enable the define
DB54
inside the
header file
DEFINE.H
and recompile the driver executable.
1. Open the IPC@CHIPTOOL FTP client. If it does not already exist, transfer the
EXTSD.EXE
driver file to the root directory of your IPC@CHIP
®
.
2. Right-click the file
AUTOEXEC.BAT
from the IPC@CHIP
®
’s flash drive. (If none exists,
create an empty file on your local drive and transfer it to the IPC@CHIP
®
.)
3. Select
Edit
from the pop-up menu.
4. An editor will open. If it does not already exist, add the filename
EXTSD.EXE
in a new line.
This will start the driver on boot.
5. Save the file and close the Editor. The file will automatically be reloaded to the chip.
6. Close the FTP client.
7. Insert the respective card.
8. Reboot the DB54.
9. After booting the IPC@CHIP
®
will dispose of a drive B: which represents the content of
the card. You can access this drive from the shell or via FTP.
Use the command
B:
to change to the cards file system from the shell. In the FTP client
you may use the drive selection box to change to drive B.
Copyright © 2007 Beck IPC GmbH
Page 18 of 35