EN
SAFETY HARNESS
This stroller has a safety harness with five fixing points.
TO RELEASE THE HARNESS
Press the button on the central piece (Fig. 20A). The fixings separate automatically.
TO FASTEN THE HARNESS
Check that the baby’s legs are either side of the centre strap. Introduce the chest strap tongues
into the side buckle housing (Fig. 20B).
Make sure the two tongues are properly adjusted in the central piece side buckles (Fig. 20C).
Adjust the belt around the baby’s waist so that fits properly.
WARNING:
Never use the chair without restraints.
For better safety, the baby should always have the safety harness done up.
HOW TO INSTALL THE RAIN COVER
Place the rain cover over the stroller. In order to avoid changing the positions of the backrest,
make sure you attach the Velcro at the points indicated (Fig. 21).
Pass the two Velcro fasteners behind the chassis bar as shown in (Fig. 22)
and then attach the Velcro fasteners as shown in (Fig. 23) before attaching the fasteners on
the footrest bar (Fig. 24).
The stroller has a large pocket in the backrest (Fig.25 A).
The pocket has an inner zipper to access the harness, if necessary disassemble (Fig.25 B).
HOW TO FOLD THE STROLLER
IMPORTANT: In order to fold the chair correctly, the seat must be in an upright position
and facing forwards.
Press the stroller folding button while (Fig. 26) pushing downwards.
The stroller will then fold up automatically (Fig. 27).
Make sure you fold the stroller up until the folding hook is fixed (Fig. 28).
17