EN
HOW TO INSTALL THE SEAT
Make sure the transversal bar is in the upper position (Fig. 10). This will ensure the seat is in
the correct position and will prevent it wobbling.
Fit the seat into the chassis and introduce the fixings, as indicated in (Fig.11).
HOW TO REMOVE THE CHAIR
Press the side buttons and pull upwards, as indicated in (Fig.12).
HOW TO CHANGE THE DIRECTION OF THE SEAT
Remove the seat, as indicated in the previous step, and turn it round. Then introduce it into the
chassis until you hear a click (Fig. 13).
HOW TO FIX AND REMOVE THE BUMPER BAR
Hold the bumper bar and press the control buttons on either side at the same time
(Fig.14A). Then fix the bumper bar on both sides of the chair. It is properly fixed when you
hear a click.
To remove the bumper bar, press both buttons at the same time and pull it out (14B).
FOOTREST
Adjust the footrest to the desired position by pressing the two footrest buttons at the same
time. Simply pull the footrest upwards: it will lift up automatically (Fig. 15).
HOW TO ADJUST THE BACKREST
The chair has 3 backrest positions.
To raise the backrest, press the lever and pull upwards (Fig. 16).
To lower the backrest position, press the lever and pull downwards (Fig. 17).
HOW TO OPEN THE HOOD
Simply pull the front part forwards (Fig. 18A). The hood has a removable sunshade. To use the
sunshade, pull it outwards (Fig. 18B).
HOW TO REMOVE THE HOOD
Press the buttons and remove it by pulling (Fig. 18C).
The hood has a magnetically fixed window. To open the window, pull the flap forwards (Fig.19A).
It also has a section with netting.
To open this section, pull the zip (Fig 19B) and then pull the hood forwards (Fig. 19C).
16
