DMX Address
Select
DMX Address
, Press the
ENTER
button to confirm, the present address will blink on the
display. Use the
UP
and
DOWN
button to adjust the address from
1
to
512
.Once the address has
been selected, press the
ENTER
button to setup, to go back to the functions without any change press
the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to
exit the menu mode
Channel Set
Select
Channel Set
, Press the
ENTER
button to confirm, the present set will blink on the display. Use
the
UP
and
DOWN
button to select channel
9/12/16
.Once the set has been selected,press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold
and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Show Mode
Select
Show Mode,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
Show 1
or
Show 2
or
Show 3
or
Show 4
mode. Once the
mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for
one minute to exit the menu mode.
Slave Mode
Select
Slave Mode,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
Slave 1
(normal) or
Slave 2
(2 light show)mode. Once the
mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for
one minute to exit the menu mode.
Black Out
Select
Slave Mode,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
Yes
(yes blackout) or
No
(no blackout)mode. Once the mode
has been selected, press the
ENTER
button to setup, to go back to the functions without any change
press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one
minute to exit the menu mode.
Sound State
Select
Sound State,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
On
(Sound On) or
Off
(Sound Off)mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any change press
the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to
exit the menu mode.
Sound Sense
Select
Sound Sense,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
0…100
mode. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again.
Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Pan Inverse
Select
Pan Inverse,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
Yes
(Pan Inversion) or
No
((Normal)mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any change press
the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to
exit the menu mode.
Tilt Inverse
Select
Tilt Inverse,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
Yes
(Tilt Inversion) or
No
((Normal)mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any change press
the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to
exit the menu mode.
