Back Light
Select
Back Light,
Press the
ENTER
button to confirm, present mode will blink on the display. Use
the
DOWN
and
UP
button to select the
On
(LED On) or
Off
((LED Off)mode. Once the mode has been
selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to exit
the menu mode.
Function Delay
Select
Function Delay,
press ENTER button to confirm, present mode will blink on the display. Use
DOWN
and
UP
button to select the
No Delay
or
1S/2S/3S Delay
(Wait for 1/2/3 seconds before these
Functions of 12CH are activated/deactivated) mode. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
9-
change press the
MENU
button
again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu
mode.
White Balance
Select
White Balance
, press the
ENTER
button to confirm, present mode will blink on the display.Use
the
DOWN
and
UP
button to select the
Red
or
Green
or
Blue
. Once the mode has been selected,
press the
ENTER
button to setup, use the
DOWN
and
UP
button to change the value (125~255).
Once the mode has been selected, press the
ENTER
button to setup, go back to the functions without
any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait
for one minute to exit the menu mode.
Manu Test
Select
Manu Test
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to select the
Pan/ Tilt
/
Red
/
Green
/
Blue/ White/Dimmer
or
Strobe
. Once the
mode has been selected, press the
ENTER
button to setup, use the
DOWN
and
UP
button to change
the value (0~255). Once the mode has been selected, press the
ENTER
button to setup, go back to
the functions without any change press the
MENU
button again. Hold and press the
MENU
button
about one second or wait for one minute to exit the menu mode.
Auto-Test
Press the
MENU
button up to when the
Auto-Test
is blinking on the display. Pressing
ENTER
button
and the unit will run self-test by built-in program. To go back to the functions press the
MENU
button
again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu
mode.
Temperature
Press the
MENU
button up to when the
Temperature Test
is blinking on the display. Pressing
ENTER
button and the display will show the temperature of the unit. To go back to the functions press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to exit
the menu mode.
Defaults Setting
Press the
MENU
button to show
Defaults
on the display. Press the
ENTER
button and the display will
blink. Use the
DOWN
and
UP
button to select the
YES
or
No
. Once the
Yes
has been selected, press
the
ENTER
button and use the
UP
and
Down
button to select the
PRO
Defaults
or
AUTO Defaults
.
PRO Defaults
: For professional users, detailed explanation as followings:
Slave Mode -->Slave 1
Black Out -->Yes
Sound State -->Off
Pan Inverse -->No
Tilt Inverse -->No
Back Light -->Off
Function Delay -->3S Delay
