Beamz MHL-363, Manual

Page: 9 / 12

4.3 DMX Controller
By using a universal DMX Controller to control the units, you will need to set DMX address from 1 to
512 so that the units can receive DMX signal
Press the
MENU
button up to when the
DMX Address
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP button
to change the DMX512 address. Once
the address has been selected, press the
ENTER
button to setup, to go back to the functions without
any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait
for one minute to exit the menu mode.
4.4 DMX
512 Configuration
9 Channel Mode:
Channel List Value Function
CH1 000-255 Pan(0-630)
CH2 000-255 Tilt(0-240)
CH3 000-255 Strobe
CH4 000-255 Red (0%-100%)
CH5 000-255 Green (0%-100%)
CH6 000-255 Blue (0%-100%)
CH7 000-255 White (0%-100%)
CH8 000-255 Dimmer (0%-100%)
CH9 000-255 Sound active
12 Channel Mode:
Channel List Value Function
CH1 000-255 Strobe Effect
CH2 000-255 Dimmer (0%-100%)
CH3 000-255 Pan(0-630)
CH4 000-255 Pan Fine(Least significant bit)
CH5 000-255 Tilt (0-240)
CH6 000-255 Tilt Fine(Least significant bit)
CH7 000-255 Sound activation
CH8 000-255 Color Effect
CH9 000-255 Red (0%-100%)
CH10 000-255 Green (0%-100%)
CH11 000-255 Blue (0%-100%)
CH12 000-255 White (0%-100%)
16 Channel Mode:
Channel List Value Function
CH1 000-255 Pan(0-630)
CH2 000-255 Pan Fine(Least significant bit)
CH3 000-255 Tilt (0-240)
CH4 000-255 Tilt Fine(Least significant bit)
CH5 000-255 Pan & Tilt Speed
CH6 000-255 Pan & Tilt Auto Run
CH7 000-255 Auto Run Speed
CH8 000-255 Auto Run Color Open
CH9 000-255 Dimmer (0%-100%)
CH10 000-255 Strobe
CH11 000-255 Red (0%-100%)
CH12 000-255 Green (0%-100%)
CH13 000-255 Blue (0%-100%)
CH14 000-255 White (0%-100%)
CH15 000-255 Color Auto Run
CH16 000-255 Color Auto Run Speed