DMX operation
A bank is a sequence of different scenes that will be called up one after another. With the DMX-240 controller you can
program up to 30 different banks, each bank containing up to 8 scenes.
Assigning a Jog Wheel to a Channel
o Choose your channel.
o Press MIDI / REC (19) to confirm.
Programming a Scene
o Press and hold the PROGRAM button (11) for 2 seconds to enter the programming mode. The PROGRAM LED will
flash.
o Select the desired scanner using the SCANNER selection buttons (1).
o Adjust the settings (the value will be shown in the display) using the respective CHANNEL faders (4).
o Press the MIDI / REC (19) to prepare saving mode.
o Select the desired bank (01 ~ 30) which will be saved through the BANK buttons (15 and 16).
o Press one of the SCENE buttons (3) in order to save the data. All LEDs on the panel will flash indicating the data is
saved.
o Select the next scanner using the SCANNER selection buttons (1) and repeat the steps above until programming is
finished or the maximum number of steps (8) has been reached.
o Press and hold the PROGRAM button (11) to exit the programming mode.
Running a Program
o Press the BANK buttons (15 and 16) and select the desired bank.
o Press the AUTO / DEL button (21). The auto LED will light.
o Adjust the speed using the SPEED fader (23) and the repetition rate using the FADE TIME fader (24).
o You can also adjust the speed by pressing the TAP button (17) twice. The time interval between two presses
determines the speed (up to 10 minutes).
Checking a Program
o Press and hold the PROGRAM button (11) and select the desired bank using the BANK buttons (15 and 16).
o Check every scene individually by pressing the respective SCENE button (3).
Editing a Program
o When programs have to be edited, it is necessary to modify a scene manually.
o Press and hold the PROGRAM button (11) to enter the programming mode.
o Select the program to be edited using the BANK buttons (15 and 16).
o Select the desired scanner using the SCANNER buttons (1).
o Adjust the desired settings using the respective CHANNEL faders (4).
o Press the MIDI / REC button (19) to prepare for saving.
o Select the desired scene using the SCENE button (3) and save.
Copying a Program
o Press and hold the PROGRAM button (11) to enter the programming mode.
o Select the desired bank using the BANK buttons (15 and 16).
o Press the MIDI / REC button (19) to prepare for copying.
o Select the target bank using the BANK buttons (15 and 16).
o Press the MUSIC / BANK COPY button (12) to copy the bank. All LEDs on the panel will flash.
CHASERS
A chaser is a sequence of different banks that will be called up one after another. With this DMX-240 controller you
can program up to 6 different chasers, each chaser up to 240 scenes.
Programming a Chaser
o Press and hold the PROGRAM button (11) to enter the programming mode.
o Select the desired chaser using the CHASER selection buttons (22).
o Select the desired program using the BANK buttons (15 and 16).
o Select the desired scene using the SCENE selection buttons (3).
o Press the MIDI / REC button (19).
o Program the next step until the chaser is finished or the maximum number of scenes (240) has been reached.
o Press and hold the PROGRAM button (11) to save the chaser.
