RST980
INSTALLATION
&
USER
MANUAL
24
Antenna Operation
Please note that earlier firmware versions of the 9505A handset may
display a message prompting the user to rotate the antenna. To toggle
between enabling / disabling this message when in the SatDOCK, using
the keypad on your 9505A handset, type in the following code :
*#92#
Docking & Undocking your 9505A handset
To dock the 9505A handset, firstly ensure you remove the rotating antenna from the
handset.
1. Place the base of the 9505A handset into the seat of
the SatDOCK ensuring that the pins on the bottom of
the 9505A handset line up with that on the seat of the
SatDOCK cradle as illustrated.
2. Push down on the handset to seat the handset base
firmly in the SatDOCK cradle.
3. To clip the handset into place, press and hold the button
on top of the 9505A handset whilst pushing it back into
the SatDOCK until it clips into place. Release the button
on top.
4. Gently pull on the handset to confirm that it is docked
correctly and won’t come loose.
When removing 9505A Handset from the SatDOCK cradle, reverse the above steps,
ensuring you hold down the button on top of the handset before trying to remove it
from the SatDOCK.
The handset can now be powered on for normal mobile operation - refer to 9505A
manual for further information.
