RST980
INSTALLATION
&
USER
MANUAL
16
Installing the SatDOCK Cradle
When selecting a location for the SatDOCK cradle, consider these guidelines:
¾
Ensure that each mounting surface is strong enough to support the control unit.
¾
Mount the handset so that it is within easy reach of the driver during normal
vehicle operation.
¾
Ensure that the SatDOCK is within reach of the HFI unit.
¾
Position the handset and cables so that it does not interfere with vehicle
operation or with driver or passenger seating or leg space.
Mount the cradle/holder so that the handset is within easy reach of the driver
during normal vehicle operation.
Allow enough room so that you can easily insert the smart handset into and remove it
from the cradle.
Ensure sufficient room is allowed for the use of the antenna connector and antenna
cable on the rear of the SatDOCK Cradle.
Securely mount the cradle in the desired location, ensuring that it is not obstructing
any of the vehicles controls or accessories.
An optional mounting bracket may be used for more tailored installations. Various
brackets can be obtained from Auto Electricians or automotive parts suppliers.
The SatDOCK can be either mounted directly to a flat
surface by using the 2 holes in the back of the cradle as
pictured below, or by means of using the RAM bracket as
outlined below.
Step 1
: Secure one the pivot bases to a convenient place in your
vehicle as per the above considerations.
Step 2
: Secure the 2
nd
pivot base onto the rear of the SatDOCK by using
2 of the supplied M4 screws.
Step 3
: Clamp the connecting bracket to each of the pivot knobs to
secure the SatDOCK in place.
