![Beam isatdock2 lite User Manual Download Page 22](http://html.mh-extra.com/html/beam/isatdock2-lite/isatdock2-lite_user-manual_2716559022.webp)
22
LOCATION
BUTTON MODE
ACTION
LED/SOUND
Ringer Press
(1 second)
Out of Call:
Toggle through the available ring tones
Hear ring tone change.
Mute Press ON/OFF
In a Call:
Mute the microphone (uplink) on the privacy handset
(optional accessory) if connected to cradle.
LED turns RED - Muted
LED turns OFF - Not muted
Up
In a Call
Increase volume on the privacy handset (optional
accessory) if connected to cradle.
Audio will sound louder in privacy handset with each press.
Down
In a Call:
Decrease volume on the privacy handset (optional
accessory) if connected to cradle.
Audio will sound quieter in privacy handset with each press.
+
Brightness dual
button simultaneous
press
(1 second)
Out of Call:
Enter LED brightness change mode. Press UP and DOWN
arrows to vary intensity. Mode will automatically exit after
5 seconds after the last button press.
All LED’s will change to WHITE and a double beep will
sound when entering brightness change mode.
A short single beep will sound when exiting change mode.
IsatDock2 LITE Buttons/LED Status
MUTE BUTTON
GREEN
RED
ILLUMINATED
N/A
Uplink audio muted
LED STATUS
GREEN
RED
ILLUMINATED
Handset registered and able to
make a call
Handset not registered / no
signal and cannot make a call
FLASHING
Call in Progress
N/A
ALTERNATING
N/A
Error detected in communicating
with IsatPhone 2 handset.
Flashing RED/BLUE
IsatDock2 LITE Front Panel
1. Ringer
2. Mute
3. Up and Down
4.
STATUS LED
2
1
3
4