IsatDock2 LITE - User Manual
15
• Verify that low resistance connections are
present between the battery negative
terminal, the vehicle chassis, and the
engine block. All wire connections should
be clean and tight.
WARNING
Do not connect the IsatDock2 LITE interface
power cable to power the unit until the full
installation is completed.
Installation Procedure
Installing the IsatDock2 LITE Cradle
Install the components in the following order.
More detailed instructions can be found in the
sections following.
1.
Mount the IsatDock2 LITE cradle
2.
Install the external BEAM antenna
3.
Connect the privacy handset
(ordered as extra option)
4.
Connect the DC power cable
When selecting a location for the IsatDock2 LITE
cradle, consider these guidelines:
•
Ensure that each mounting surface is
strong enough to support the cradle.
•
Allow enough room so that you can easily
insert the IsatPhone 2 handset in and out
from the cradle.
•
Ensure that the IsatDock2 LITE is within cable
distance of power and antenna connections
•
Position the handset and cables so that it
does not interfere with vehicle operation or
with driver or passenger seating or leg space.
•
Ensure sufficient room is allowed for the
antenna and interface cables to be routed
from the rear of the IsatDock2 LITE cradle.
•
Ensure the mounting position accounts
for the antenna of the docked IsatPhone 2
that protrudes beyond the side of the dock
(~17mm)
