20
IsatDock2 LITE Usage
Operation of the IsatPhone 2
Prepare the Inmarsat IsatPhone 2
Ensure that the IsatPhone 2 Handset has the
latest compatible firmware installed. For more
information visit:
www.beamcommunications.com/support/
isd2lite
Starting Up
1.
Retract the antenna on the IsatPhone 2
handset, open slighlty.
2.
Place the IsatPhone 2 as per instructions
“Docking & Undocking” on page 13.
3.
Turn vehicle ignition on. The IsatPhone 2
will automatically power up followed by
a rising beep, once the docking station
has successfully synchronized with the
IsatPhone 2.
4.
Wait for the IsatPhone 2 handset to
register on the Inmarsat network. The
STATUS LED on the docking station
will turn green when a successful
registration has taken place.
5.
You are now ready to make and receive calls.
Charging the IsatPhone 2 handset
The IsatDock2 LITE provides charging power to the
IsatPhone 2 handset via its USB connector.
The IsatPhone 2 battery is a lithium-ion cell
which has a safety temperature range whilst
charging. This range is from 0-45
°
C (32-113
°F
).
Due to the increased heating effects on the
IsatPhone 2 handset whilst it is docked and
being charged, it is ideal for the ambient
temperature to be approximately 15 degrees
below the 45
o
C upper limit for the handset
to charge the battery whilst docked. If the
battery temperature exceeds this limit, then
the IsatPhone 2 may cease charging until the
temperature is reduced.
Placing Voice Calls
Bluetooth
®
calls via IsatPhone 2
The IsatDock2 LITE allows for Bluetooth audio
calls to be placed via the IsatPhone 2 handset
while docked. Consult the IsatPhone 2 manual
for further information on pairing and Bluetooth
discovery setup
NOTE:
If the IsatPhone 2 is removed from the dock during a
call, the call will drop out during this transition.
NOTE:
One common cause for connection failure is a flat
IsatPhone 2 battery which prevents the IsatPhone
2 from turning ON. In these instances the docking
station will attempt to charge the IsatPhone 2
handset while it is switched OFF, until enough
charge is present for the IsatPhone 2 to turn ON.
This charging period can take up to 20 minutes
depending on how flat the battery.
