RST310 USER & INSTALLATION MANUAL
25
Removing the Antenna from the 9505A handset
1. Ensure the antenna is facing down and completely retracted
2. Holding the 9505A handheld firmly, press down on the antenna release button
as shown.
3. Whilst holding down the release button firmly, remove the antenna from the
connection gently.
Connecting the antenna adaptor
1. In the same way the antenna was removed, follow the reverse sequence to
reconnect the antenna adaptor. Ensure that the antenna adaptor “clicks” into
place in either of the 45
°
angles:
CORRECT ORIENTATION OF ADAPTOR
WRONG ORIENTATION
2. Ensure that the antenna cable is fixed with proper strain relief, so that there is
no stress on the adaptor or the phone antenna connector.
NOTE: If the phone displays: “Rotate and Extend Antenna”, then the adaptor is
not properly aligned and clicked into the 45
°
angle. Please re-adjust adaptor.
Note:
Be careful to ensure that when you are removing or
installing the antenna or adaptor that the handsets power is
turned off. The handset should not be turned on until after the
connector cable is attached also.
X
X