SETUP
You can power the AK140 either by batteries or by using a power
adaptor. Follow the instructions described below.
Using Batteries
Insert 6x AA size (SUM–3 or Lr6) or equivalent alkaline batteries
into the battery compartment.
1. Open the battery compartment cover located on the
bottom of the AK140.
2. Insert the batteries. Ensure that you follow the polarity
markings on the cabinet.
3. Replace the compartment cover and ensure that it locks
firmly in place
Caution:
•
Do not mix used and new batteries.
•
Always use batteries of the same type.
•
Always remove the batteries from the AK140 when it is not
being used for an extended period of time.
Using the Power Adapter
1. Please ensure the POWER ON/OFF switch of the
AK140 is set to OFF.
2. Connect the AC adaptor to the power supply jack.
3. Plug the AC adaptor into an AC outlet. This will
automatically cut off the battery power supply.
4. Turn on the AK140.
Note:
•
When the keyboard is not in use or during
a thunderstorm, please disconnect the power for
safety purposes.
•
The keyboard will automatically shutdown to preserve power
if not used for 30 minutes.
This section contains information about setting up the AK140 and preparing to play. Please read this section carefully before turning
the power on.
POWER SUPPLY
6
AK140
