REF: BBONEBLK_SRM
BeagleBone Black System
Reference Manual
Rev A5.2
Page 19 of 108
3.
If you have a single wireless keyboard and mouse combination such as seen in
Figure
9
below, you need to plug the receiver in the USB host port of the board as
shown in
Figure 10
.
Figure 9.
Wireless Keyboard and Mouse Combo
Figure 10.
Connect Keyboard and Mouse Receiver to the Board
If you have a wired USB keyboard requiring two USB ports, you will need a HUB
similar to the ones shown in
Figure 11
. You may want to have more than one port for
other devices. Note that the board can only supply up to 500mA, so if you plan to load it
down, it will need to be externally powered.
Figure 11.
Keyboard and Mouse Hubs
4.
Connect the Ethernet Cable
