REF: BBONEBLK_SRM
BeagleBone Black System
Reference Manual
Rev A5.2
Page 16 of 108
4.
When the board starts to boot the LEDs will come on in sequence as shown in
Figure 5
below. It will take a few seconds for the status LEDs to come on, so be
patient. The LEDs will be flashing in an erratic manner as it boots the Linux
kernel.
Figure 5.
Board Boot Status
3.3.2
Accessing the Board as a Storage Drive
The board will appear around a USB Storage drive on your PC after the kernel has
booted, which will take a round 10 seconds. The kernel on the board needs to boot before
the port gets enumerated. Once the board appears as a storage drive, do the following:
1)
Open the USB Drive folder.
2)
Click on the file named
start.html
3)
The file will be opened by your browser on the PC and you should get a display
showing the Quick Start Guide.
4)
Your board is now operational! Follow the instructions on your PC screen.
