Page 9 of 24
5.4.2
Beacon Master/Repeater Stations wiring in ring
If two Beacon Stations are wired in Master/Repeater format, with the outstations shared between both
the Master Station and the Repeater Station, the Beacon system has to be wired as a ring, with each
outstation connected via a radial circuit to either the Master Station or Repeater Station, as shown in
the schematic below. This ensures that the any single cable fault will not affect the operation of more
than one outstation. For further information see 6.4.
5.4.2.1
Network Wiring
Note:
Only connect the earth screens on the Net in cables, cut back and insulate Net OUT
earth screens
