Beachcomber Hot Tubs ET-1000, Reference Manual

Page: 7 / 8

wifi
Note: This function is available only if a BIC-e in.touch 2 spa transmitter (C O module) is connected to the
hot tub ' s management system (as shown ) and a BIC-e in.touch 2 home transmitter (EN module ) is
connected to your home router (as shown below). See Quick Start Guide & "how - to" links below .
wifi (in.touch 2)
When an in.touch 2 is detected, this
network will appear.
See in.touch Quick Start Guide below.
Bic-e in.touch 2
Home
Quick Start Guide
Blinking LED
Modules may be out of range
Simply connect in.touch 2-home
outside, close to the spa (via an
extension cord for power). Router
connection not needed for this
test. If modules stop blinking,
moving them closer to each other
is the only solution.
Modules may be Unpaired
If the previous test did not
work, proceed to pairing
according to instructions in
the Pairing section of the
in.touch 2 Techbook.
T roubleshooting BIC-e in.touch 2
Port 10022 may be closed on your
router. If port 10022 is open, some
other configuration may be
blocking access to Internet. The
application will still be able to
connect to your spa on your local
network. Server may be temporarily
«off-line» for servicing/
maintenance. Try again later
.
Green color
For additional T roubleshooting information , refer to : Bic-e in.touch 2 Techbook
www.beachcomberhottubs.com/owners/manuals-and-guides
1
in.touch 2
2
3
BIC-e in.touch 2 Home
Transmitter (EN module)
BIC-e in.touch 2 Spa Transmitter (CO module)
in.touch 2 - How to create an account
http://bit.ly/2uK6Rne-InTouch2-CreateAccount
in.touch 2 - Select your spa
http://bit.ly/2UrwAz7-InTouch2-SelectYourSpa
For additional setup information , refer to :
Bic-e in.touch 2 Techbook
www.beachcomberhottubs.com/owners/manuals-and-guides
in . touch 2 - Home installation
http://bit.ly/2UbY50htest-InTouch2-HomeInstallation
in.touch 2 "how-to" videos :
7