Beaba 920290, Instructions Manual

Page: 13 / 92

12 13
USING ON A BED
• Never use on a bed with wheels, or lock the wheels before using.
• Never use on a folding bed.
• Never use on a bed with a rounded horizontal upper frame.
• Never use the bed with the changing table on it.
• Always check that the bed’s dimensions are adapted to the changing table
before positioning it.
38 cm mini - 60 cm maxi
Place the product on the bed ensuring that the adjustable feet (c) are
inside the bed. Check that the changing table is compatible with the bed’s
dimensions and shape.
Adjust the 3 adjustable feet (c) so that they are supported between two
bars of the bed. Check that the feet are adjusted properly by trying to lift the
changing table.
Always place the changing table in the centre of the bed.
USING ON A CHEST OF DRAWERS
Remove the adjustable feet (c). Position the changing table on a flat and
stable surface, ensuring that the changing table is not larger than the surface.
• Never use on a surface with wheels, or lock the wheels before using.
• Always check that the surface is flat and stable for positioning the changing
table.
• Using the product on a chest of drawers does not allow the product to
be locked to the support. Increase supervision when using in this manner.
• Always remove the feet before positioning the changing table on a chest
of drawers.
CAUTION: Increase supervision when using on a chest of drawers
or any other surface because there is no locking system.
USING THE DRAWERS
To open the drawers, pull open as far as the stop block. Maximum weight: 2kg.
Notice Plan CameleO 2015 105X150 v2.indd 13 06/11/2015 10:27