4
4x
2x
1x
3x
4h
x
HOW TO USE THE REMOTE CONTROL
4 hours after last use, the sensor locks the access to the remote control session.
Cut and restore power supply. The remote control session is accessible again during 4 hours.
ADJUSTING ONE OR MORE PARAMETERS
CHECKING A VALUE
RESTORING TO FACTORY VALUES
SAVING AN ACCESS CODE
DELETING AN ACCESS CODE
The access code is recommended for sensors installed close to each other.
After unlocking, the red
LED flashes and the sensor
can be adjusted by remote
control.
If the red LED flashes quickly after unlocking, you
need to enter an access code from 1 to 4 digits.
= field width: 4.2 m
= field width is defined by teach-in
To end an adjustment session,
always lock the sensor.
Enter the existing code
teach-in
x = number of flashes = value of the parameter
SAFETY FIELD TEACH-IN
3 s
max. 30 s