2
9.
Bracket (optional)
CAUTION!
Use of controls, adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
Test the good functioning of the installation before leaving the premises.
III. LED-SIGNALS
IV. SYMBOLS
Caution!
Laser radiation
Remote control
sequence
Possible
remote control
adjustments
Factory values
Attention
Note
detection
error LED
LED flashes
power on
no power or
LED is off
LED flashes quickly
LED flashes slowly
V. SAFETY TIPS
The device contains IR and visible laser spots.
IR laser: Wavelength 905nm; Max. output pulse power 25W
(Class 1 according to IEC 60825-1)
Visible laser: Wavelength 635nm; Max. output CW power 0.95mW
(Class 2 according to IEC 60825-1)
The visible laser spots can be deactive during normal functioning.
The installer can activate the visible spots if needed.
CLASS 1 LASER PRODUCT
CLASS 2 LASER RADIATION
DURING INSTALLATION.
DO NOT STARE INTO BEAM
IEC 60825-1
CLASS 1 LASER PRODUCT
CLASS 2 LASER RADIATION
DURING INSTALLATION.
DO NOT STARE INTO BEAM
IEC 60825-1
Do not look into the laser
emitter or the visible red
laser beams.
Only trained and qualified
personnel may install and
setup the scanner.
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
