200646_01
17
If it is necessary to remove all coals / pebbles for cleaning then any soot or debris should
be removed from the ceramic elements and from the burners. A vacuum cleaner must not
be used on the ceramic pieces.
2
If large pieces of debris are found in the fire - sufficient to alter the appearance or
operation of the appliance - the fan unit should be checked and inspected and the
appliance serviced before further use.
3
In any event, the flue and fan system should be checked annually to ensure continued
clearance of combustion products and that there is no excessive build up of soot.
4
The decorative trim on the front of the fire is held in place with magnets. Should you wish
to clean the trim, simply pull it off of the fire, clean using a slightly dampened cloth and
then replace, ensuring that one magnet is positioned in each corner. The Brass & Chrome
trims have a lacquered finish—Do not use metal polishes to clean.
28 ASSEMBLING THE FIRE AND LAYING CERAMICS COALS / PEBBLES
When laying the ceramics & coals / pebbles on the burner, closely follow the instructions
found on pages 11 - 12 of these instructions. Failure to do so will possibly cause the
appliance to burn incorrectly giving rise to sooting and poor heat output.
GUARANTEE.
1. The appliance is guaranteed for one year from the date of purchase.
2. This guarantee is given subject to the following provisions:-
a. The installation is carried out by a CORGI registered person.
b. That the fireplace conforms to the requirements given in the Installation Instructions
for this appliance.
c. That our instructions covering cleaning and handling are adhered to. This guarantee
does not cover mishandling.
d. That the guarantee card supplied with every purchase is returned to us for registration
within four weeks of the date of purchase with the details correctly filled in.
e. That any part or parts on which a claim is made are returned to us postage paid for
inspection.
f. That our liability is limited to free replacement of the parts affected.
g. The guarantee does not cover (1) Normal wear and tear. (2) Possible discolouration
of polished parts.