Seite 17 von 24
COMMISSIONING
PREPARATION FOR USE
IMPORTANT!
On delivery, the filters are packed in a plastic film for protection. This film must be removed
from the filter before it is used for the first time.
Place the unit on a level surface with a properly earthed socket.
The distance to walls or other objects must be at least 30 cm.
Before using the unit, make sure that both air inlet and air outlet are free of
obstructions and not blocked.
Observe the instructions in the chapter "Important information on safety, location and
electrical connection".
INSTALLATION OF THE FILTERS
You can start using your air purifier in just a few steps:
1. Removing the front cover
Remove the front cover by pulling on the top with
both hands.
2. Remove the filter
Take out the 3 in 1 filter.
3. Removing the transport protection
The filter is wrapped in a plastic film for
protection.
Remove the foil from the filter and make sure that
no foil residues adhere to the filter.
