Seite 19 von 24
OPERATION
You can set all functions directly on the unit.
Depending on the function set, the indicator lights on the control panel light up.
SWITCH ON THE UNIT
1. Connect the unit to the earthed socket.
2. Press the
- button to switch on the unit.
3. When the unit is switched on, it starts in Auto mode.
4. The "
AUTO"
indicator lights up.
5. Press the
- button again to switch to standby mode.
6. None of the indicators light up in standby mode.
NOTE
Never switch off the air purifier by pulling the plug directly from the mains. To switch off,
always press the on/off button and wait a few minutes before disconnecting the unit from the
mains. This allows the unit to go through a cycle of checks to verify its functionality.
SET FUNCTIONS
Auto mode
Optimal for everyday use, the unit itself controls how strongly the air is cleaned.
1. Press the
- button when the unit is in another mode.
2. When the Auto mode is activated, the "AUTO" indicator on the control panel lights
up.
3. To exit Auto mode, press the
- button again or change the speed level using
the
- button.
Fan speed listing based on PM2.5 value
Air quality indicator
Light
Blue
Green
Red
PM2.5 value
0-50
51-100
>100
Fan stage
Low
Medium
High
NOTE
It is recommended to use the unit in Auto mode. In Auto mode, the unit works most efficiently
because it regulates the fan speed according to the level of fine dust in the room.
