Be Cool atomic, Manual

Page: 42 / 96

EN
42
Press the button on the Headrest handle on the top
of the seat.
It is important to make sure the headrest fitproperly
to head..
3 .2-3 4 Recline Positions of the Car
Seat
The car seat can be used in 4 Recline positions:
Lift the Recline adjustment handle under the front
of the seat up and pull or push the shell forwards or
backwards. Release the handle in the required position
and push until you hear a distinct click.
3 .3 Securing your baby using the
harness
Loosen the harness straps by pressing the release
button and pulling the harness straps as for as you can.
Note! Do not pull the Shoulder pads.
Open the harness buckle, the fix the harness straps into
the belt guide hand.
Put the baby into the car seat.
The correct height of the shoulder belts is attained
when the belt disappears into the shell slightly above
the shoulder of the child.
Make sure that the harness straps fit properly over the
shoulders of the child.
Slide buckle tongues together and insert them in the
buckle with an audible sound “click”.
Pull the straps tight by the harness adjustment strap,
and make sure the tightness is comfortable to your kid.
CAUTION:
• Do not twist or interchange the harness straps.
3 .4 Tightening the harness
CAUTION:
• Pull the strap end straight towards you, not
upwards or downwards. Please pay attention to
the strap end. Whilst traveling (especially outside
the car) it should always be attached to the cover.
3 .5 Checklist to ensure that your baby
is buckle up correctly
IMPORTANT:
For the safety of your baby,
please check that...
• The harness straps of the car seat are
IM 2093 ,00_ATOMIC.indd 42 20/2/19 17:16