background image

8

RailMAB 960

GB

Safety equipment

Oil level monitoring

The engine (12) is also equipped with oil 

level monitoring. The machine cannot be 

started if the oil level is not sufficient before 

starting.
Check the oil level:

 

See section "Preparing the engine and 

checking/filling oil".

Symbols on the machine

NOTE

 

Pay attention to the documentation of 

the manufacturer.

The symbols on the machine have the 

following meaning:

Symbol Meaning

Read the operating instructions 

before beginning work!

Wear protective goggles and 

ear protection!

Personal protective equipment

Wear the following protective equipment at 

all times when operating the machine:

Symbol Meaning

Close-fitting work protection 

clothing with a low tear strength

Goggles for protecting eyes 

against flying parts and liquids 

and ear protection in areas with 

noise emission >80 dB(A)

Safety shoes for protecting feet 

against falling objects

Wear the following additional protective 

equipment during special operations:

Symbol Meaning

Helmet for protecting your head 

against falling objects

Wear a safety belt where there 

is a danger of falling.

Gloves for protection against 

injuries

Safety

Summary of Contents for RailMAB 960

























Reviews: