BDS RailMAB 960, Operating Instructions Manual

Page: 10 / 24

10
RailMAB 960
GB
Preparation
This section contains important instructions
on required preparation before starting
work.
The machine is intended to be used in
a horizontally-aligned work position at
close proximity to the ground .
Additional safety measures when
not in a horizontal work position at
close proximity to the ground
WARNING
Risk of injury from a falling machine.
When not working in a horizontal work
position at close proximity to the ground,
the machine must be secured against
falling down.
► Use suitable slinging or hoisting
equipment to secure the machine.
► Before beginning any work, check
secure positioning of the safety
measures.
► Use the protective equipment stipulat-
ed in the section Personal protective
equipment.
Checking the rail type
The holding force of the fast clamping
system (5) depends on the fitting accuracy
of the rail adapter (6) to the rail.
The following requirements must be fulfilled
in order to establish sufficient holding force:
■ Only the rail adapters (6) associated
with the rail type may be used.
NOTE
► In addition to the rail adapters (A) list-
ed in the range of accessories, BDS
offers special adapters for special
rails on request.
Preparation