50
Preparations
MAB 485
ENGLISH
KEYLESS quick-change drill chuck system
Inserting the tool
Push the KEYLESS quick-change drill chuck system (A) into
the morse taper (3) of the machine.
Connect the lubricant line.
Open the quick-change drill chuck system (A) by pushing up
the sleeve and insert the tool into the chuck.
NOTE
Insert the appropriate ejector pin before inserting the core
►
drill.
WARNING
Risk of injury from incorrectly inserted tool or tool mount
-
ing .
Check by briefly turning the tool whether the collet is en
-
►
gaged.
Removing the tool
Open the quick-change drill chuck system (A) by pushing up
the sleeve and pull the tool down out of the chuck.
Adapter for thread taps
Inserting the tool
Insert the appropriate adapter for thread taps (G) into the
KEYLESS quick-change drill chuck system (A).
Insert the thread tap into the adapter for thread taps (G).
Removing the tool
Pull the thread tap down out of the adapter for thread taps
(G).
Open the quick-change drill chuck system (A) by pushing up
the sleeve and pull the adapter for thread taps (G) down out
of the chuck system.
Summary of Contents for MAB 485
Page 153: ......