
47
Preparations
MAB 485
ENGLISH
Steel of low thickness
When drilling in steel of low thickness, an additional steel plate
(minimum dimensions 100 x 200 x 20 mm) must be placed under
the workpiece. Secure the steel plate to prevent it from falling.
NF metals or workpieces with an uneven surface
A special holding device must be used when drilling in NF metals
or in workpieces with an uneven surface.
NOTE
BDS offers special clamping devices for tubes and non-
►
magnetic materials in its range of accessories.
Inserting the tool
The machine is equipped with an MK tool mounting. Depending
on the type of tool to be used, corresponding drill chucks, quick-
clamping systems or adapters must be employed.
Tool
Tool mounting to be used
Tool with
taper MK
Insert the tool directly into the morse taper
(3).
Tools with
19 mm Weldon shank
Use KEYLESS quick-change drill chuck
system (A).
Tools with
straight shank
Use key-type drill chuck (H) with tapered
mandrel MK2/B16 (F).
Thread taps
Use KEYLESS quick-change drill chuck
system (A) with the appropriate adapter
(G) for thread taps.
Summary of Contents for MAB 485
Page 153: ......