
48
Preparations
MAB 485
ENGLISH
Safety precautions
WARNING
Risk of injury!
Do not use damaged, soiled or worn tools.
►
Carry out tool changes only when the machine is switched
►
off and at a standstill. Remove plug from the mains socket.
After inserting, check that the tool is engaged securely.
►
Only use tools, adapter and accessories that match the
►
machine.
MK tool mounting
Inserting the tool
Before mounting, clean the shank of the tool, adapter or drill
chuck and the morse taper (3) of the machine.
Push the tool from below into the morse taper (3) of the
machine.
WARNING
Risk of injury from incorrectly inserted tool!
Check the proper seating of the tool, adapter or drill chuck in
►
the MK tool mounting.
Removing the tool
Turn the tool until the ejector pin (E) slips into the opening for
the ejector pin (4).
Prise out the tool with the ejector pin (4) or loosen the tool by
tapping against the ejector pin.
Summary of Contents for MAB 485
Page 153: ......