Operation
MAB 480
20
Operation
Activating/deactivating magnetic clamp
Activating magnetic clamp
CAUTION
►
Switch on the magnetic clamp only when the machine is
standing on a magnetic substrate to avoid overheating of the
magnet .
Turn on switch (22) . The indicator light in switch (22) comes
on .
Check the magnet clamping force at the magnet indica-
tor (24). When the magnet clamping force is sufficient, the
MAGNET POWER indicator light (24) is green . If the MAG-
NET POWER indicator light (24) is red, there is not sufficient
magnet clamping force available .
CAUTION
►
The maximum magnet clamping force is only available after
switching on the motor .
Deactivating magnetic clamp
Secure the machine at the handle to prevent the machine
from slipping off the surface.
Turn off switch (22). The indicator light in switch (22) goes
out .
Switching machine ON/OFF
Turn the machine ON at the ON/OFF switch (21) with the
green button (I) and OFF with the red button (O) .
NOTE
►
The machine can only be switched on when the magnetic
clamp has been switched on .
►
Allow a severely overheated machine to run on at no-load
speed for approx. 2 minutes to let it cool down.
►
The machine switches off automatically in the event of a
power failure or if the magnetic clamp is switched off.
