Preparations
MAB 480
17
Steel of low thickness
When drilling in steel of low thickness, an additional steel plate
(minimum dimensions 100 x 200 x 20 mm) must be placed under
the workpiece . Secure the steel plate to prevent it from falling .
NF metals or workpieces with an uneven surface
A special holding device must be used when drilling in NF metals
or in workpieces with an uneven surface .
NOTE
►
BDS offers special clamping devices for tubes and non-
magnetic materials in its range of accessories .
Inserting the tool
The machine is equipped with an MK tool mounting . Depending
on the type of tool to be used, corresponding drill chucks, quick-
clamping systems or adapters must be employed .
Tool
Tool mounting to be used
Tool with
taper MK
Insert the tool directly into the morse
taper (3) .
Tools with
19 mm Weldon shank
Industrial holder MK2 19 mm Weldon (A) .
Tools with
straight shank
Use drill chuck with MK2/B16 tapered
mandrel (available as an accessory) .
Thread taps
Use the appropriate adapter for thread
taps (available as an accessory) .
