Preparations
MAB 480
19
Weldon industrial tool holder
Inserting the tool
Insert the
MK2/19 mm Weldon industrial holder
(A) into the
morse taper (3) of the machine .
Before inserting, clean the Weldon shank of the tool and the
tool holder .
Loosen both hexagonal socket screws in the tool mount (A)
with the corresponding
hexagonal offset screwdriver
supplied .
Insert the tool into the tool mounting
NOTE
►
Insert the appropriate ejector pin (B,C) before inserting a
core drill .
Tighten both hexagonal socket screws in the tool mount (A)
with the corresponding
hexagonal offset screwdriver
supplied .
Removing the tool
Loosen both hexagonal socket screws in the tool mount (A)
with the corresponding
hexagonal offset screwdriver
supplied
and remove the tool from below .
