Preparations
MAB 480
18
Safety precautions
WARNING
Risk of injury!
►
Do not use damaged, soiled or worn tools .
►
Carry out tool changes only when the machine is switched
off and at a standstill. Remove plug from the mains socket.
►
After inserting, check that the tool is engaged securely .
►
Only use tools, adapter and accessories that match the
machine .
MK tool mounting
Inserting the tool
Before mounting, clean the shank of the tool, adapter or drill
chuck and the morse taper (3) of the machine .
Push the tool from below into the morse taper (3) of the
machine .
WARNING
Risk of injury from incorrectly inserted tool!
►
Check the proper seating of the tool, adapter or drill chuck in
the MK tool mounting .
Removing the tool
Turn the tool until the ejector pin (E) slips into the opening for
the ejector pin (4) .
Prise out the tool with the ejector pin (4) or loosen the tool by
tapping against the ejector pin .
