Chapter 4: Maintenance
29
5. Remove the neck support collar and save it for the next
cubitainer.
6. Place the 2-inch long waste sensor probe into the 500-mL
beaker containing the 10% bleach solution you have prepared.
7. If necessary, label the cubitainer as WASTE and affix a
biohazard label onto the cubitainer.
8. Discard the waste according to federal, state, and local
regulations.
Item
Description
1
Neck support color
2
Waste cubitainer
3
Sheath cubitainer
Caution!
Avoid splashing the 10% bleach solution
inside the rim of the cap assembly. Doing so can
saturate the air filter, which should then be
changed. See
Replacing the air filter (page 37)
for
instructions.
