BD 9003TIG03-G Quick Reference Manual Download Page 17

Page: 17 / 18

0000CF04424 Iss. 1 17/18

Display

Action

DOSE WOULD EXCEED

Infusion rate entered exceeds a Guardrails soft

limit.

• Check the infusion setting.
• To confirm

OVERRIDE LIMIT?

press

YES

• To deny

OVERRIDE LIMIT?

press

DOSE UNDER

Infusion rate entered is under a Guardrails soft

limit.

DOSE NOT PERMITTED

Dose rate entered exceeds the hard maximum

limit.

• Check the infusion setting and

adjust to appropriate required

value.

RATE NOT PERMITTED

Infusion rate entered exceeds the hard

maximum limit.

CONCENTRATION NOT PERMITTED

Concentration entered exceeds the hard

maximum limit, or is under the hard minimum

limit.

BOLUS DOSE NOT PERMITTED

Bolus dose rate entered exceeds the hard

maximum limit.

WEIGHT ABOVE LIMIT

Patient weight entered exceeds a Guardrails

soft limit.

• Check the weight setting.
• To confirm

OVERRIDE LIMIT?

press

YES

• To deny

OVERRIDE LIMIT?

press

WEIGHT BELOW LIMIT

Patient weight entered is under a Guardrails

soft limit.

BOLUS DOSE WOULD EXCEED

Bolus dose rate entered exceeds a Guardrails

Soft Limit.

• Check the bolus setting.
• To confirm

OVERRIDE LIMIT?

press

YES

• To deny

OVERRIDE LIMIT?

press

BOLUS DOSE UNDER

Bolus dose rate entered is under a Guardrails

soft limit.

Advisories

0000CF04424.indd 17

17/09/2019 10:45:06

Summary of Contents for 9003TIG03-G



















Search results

Summary of Contents for 9003TIG03-G

Reviews:

Related manuals for 9003TIG03-G

Brands by name

Popular brands

BD 9003TIG03-G, Quick Reference Manual

Search results

Summary of Contents for 9003TIG03-G

Reviews:

Related manuals for 9003TIG03-G

Brands by name

Popular brands