9
OPERATION & SAFETY DECALS
Part # 164202
E
D
C
A
B
Part # 155587
CAUTION
DO NOT
operate without
guards in place.
!
Part # 155038
SERVICE OR
WARRANTY
FOR INFORMATION ON
PLEASE CALL
1-800-474-5594
Part # 171239
Scan for manuals
Part # 155672
NOTICE
Most motor problems are caused by
low voltage from improper extension
cords. See owner’s manual for
extension cord selection.
!
H
Part # 154398
DO NOT operate
this equipment
before reading the
owner’s manual.
WARNING
!
G
F
Part # 154822
Receptacle is for water
pump only.
125V .6 amps max.
!
CAUTION
WARNING
• Use of this equipment can expose you to chemicals
including nickel and crystalline silica which are known to
the State of California to cause cancer.
• For more information go to www.P65Warnings.ca.gov.
• Repeated and/or substantial inhalation can cause
serious or fatal respiratory diseases including silicosis.
• Employ dust controls and protection per
OSHA/NIOSH/MSHA.
!
Label Part #164202
Part # 155678
!
CAUTION
This saw is to be used
with a Ground Fault
Circuit Interrupter.
Decal Location
Description
A
Motor
Service - Warranty
B
Motor
QR Code for Manuals
C
Motor
Notice - Motor
D
Blade Guard
Caution - Guards in Place
E
Motor
Warning - Silica
F
Motor
Caution - GFCI
G
Motor
Caution - Receptacle
H
Motor
Warning - Read Manual
H
G
A
B
C
E
F
D
Safety labels contain important safety information. Please read the information contained on each
safety label. These labels are considered a permanent part of your saw. If a label comes off or
becomes hard to read, contact Barranca Diamond or your dealer for a replacement.
BD DROP SAW
SAFETY
