23
www.bdsensors.de
CIT 400
10. Service / repair
Information on service / repair:
- www.bdsensors.de
- [email protected]
- Service phone: +49 (0) 92 35 / 98 11 0
10.1
Recalibration
During the life-time of the device, the offset may shift. As a consequence, a deviating signal val-
ue in reference to the nominal pressure range starting point may be transmitted.
The full scale may also shift. This would cause a signal value of the pressure switch to be
transmitted that deviates from the nominal pressure range end point.
If one of these two phenomena occurs after prolonged use, a recalibration is recommended to
ensure furthermore high accuracy.
You can send us the device for recalibration. It is also possible to perform this recalibration by
yourself with the help of a pressure reference. The required information is given in the menu
"CAL" in the menu list.
10.2
Return
Before every return of your device, whether for recalibration, decalcification, modifications or
repair, it has to be cleaned carefully and packed shatter-proofed. You have to enclose a notice
of return with detailed defect description when sending the device. If your device came in
contact with harmful substances, a declaration of decontamination is additionally required.
Appropriate forms can be downloaded from our homepage. Download these by accessing
www.bdsensors.de or request them:
[email protected] | phone: +49 (0) 92 35 / 98 11 0
11. Disposal
The device must be disposed of according to the European Directive 2012/19/EU
(waste electrical and electronic equipment). Waste equipment must not be disposed
of in household waste!
NOTE
- Dispose of the device properly!
12. Warranty Terms
The warranty terms are subject to the legal warranty period of 24 months, valid from the date of
delivery. If the device is used improperly, modified or damaged, we will rule out any warranty
claim. A damaged diaphragm will not be accepted as a warranty case. Likewise, there shall be
no entitlement to services or parts provided under warranty if the defects have arisen due to
normal wear and tear.
