MODEL 948
This is the largest tractor in the BCS product line.
It has a differential drive transmission and two wheel brakes,
four forward gears and three reverse gears. The drive is con-
trolled using only one control rod located on the left side of the
handlebar.
The PTO is controlled using one control rod located on the
right side of the handlebar.
With the tiller attachment on this model there is also a PTO/
reverse lockout device that prevent shifting into reverse with
the tiller tines engaged. This lockout automatically disengages
when a front-mount attachment is in-stalled.
This allows you to drive in forward or reverse with the PTO en-
gaged.
When a front mount attachments installed, what was the rever-
se gears in the tilling mode are now the forward gears in the
front attachment mode.
In the front attachment mode there is a high speed lock-out
that blocks out the high speed gears that were used in the
tilling mode.
20
2
RED
REVERSER
LEVER
RIGHT BRAKE
LEVER
DIFFERENTIAL
LEVER
THROTTLE
LEVER
CONTROL COLUMN INDEXING LEVER
CLUTCH LEVER
RED
ENGINE
STOP
LEVER
LEVER
LATCH
LEFT
BRAKE
LEVER
GEAR ROD
P.T.O.
CONTROL
ROD
HANDLEBAR
HEIGHT
ADJUSTMENT
LEVER
