UNPACKING
IMPORTANT
Use extreme care to avoid crimping or severely bending
the control cables while unpacking and assembling the
unit.
WARNING
Take care to avoid being cut by the staples or nails
when opening the carton.
Open the top and lay out the sides of the carton. Remo-
ve the parts and tools to be used in assembling the unit.
The fasteners required for assembly have been placed
at locations where they are to be used.
ASSEMBLING THE
UNIT
1.
INSTALL THE WHEELS:
a) Except for one or two special sizes, most wheel and
tire combinations can be mounted for either a wide
or narrow track.
For all applications except tilling and plowing, the re-
commended mounting is wide track for stability.
The "Vees" of tractor tread tires should point in the
direction of forwards rotation.
On convertible models, which can be used with both
front-mount and rear-mount attachments, mount the
wheels for the attachment that will be used the most.
It is not necessary to remount the wheels when chan-
ging attachments.
b) For wide track, mount the wheels with the tire valves
towards the outside.
For a narrower track, mount the wheels with the val-
ves toward the inside.
2.
ADJUST THE PRESSURE TO 15 POUNDS.
21
21
