Änderungen vorbehalten – Stand 08.05.2019
36
Pain before Treatment
Fig. 14 – Pain before Treatment
When starting a program from the „Pain“ category, the
currently felt pain can be recorded according to the 10
point pain scale.
This is done by pressing on the corresponding value in
the diagram. 0 corresponds to no pain, 10 to the
maximum pain.
This query is the basis of the statistics function of the
MSTU 100. The pain before and after each treatment
can be recorded. From the derived data, it can be seen
how the pain develops over the course of the treatments.
Pressing the „Start“ button allows you to skip this step.
No pain value is recorded, and the display changes to
the second treatment screen and the treatment starts.
The „back“ button in the upper left corner of the screen
takes you back to the main menu.
Treatment - Page 1
Fig. 15 – Treatment – Page 1
If a treatment is running, this is shown by the status
indicators at the lower edge of the screen, as well as the
counting down of the program duration. The status
indicators correspond to the channels below.
If the indicator is yellow, this channel is active and no
fault is present.
If the indicator is red, a fault is present.
(see section „Faults“)
Pressing „pause“ causes the treatment to pause.
Pressing „stop“ aborts the treatment.
Pressing the „information“ button takes you tot he
second page of the treatment screen.