Änderungen vorbehalten – Stand 08.05.2019
16
Transport Case (Optional)
The transport case protects the device from environmental influences. It is recommended to
store the BCR Premium MSTU 100 in this case when not in use. The case is available as an
optional accessory.
Light Hand Piece
The light hand piece CELLIGHT is a non-invasive and non-burdensome accessory for the
BCR Premium MSTU 100.
Its mode of operation is based on the stimulation of afflicted cells by microcurrent and light.
The stimulation by light takes place in parallel to the stimulation by current and supports the
effects of the current.
The electronics of the BCR Premium MSTU 100 allow for the modulation of the red and blue
LEDs, integrated into the hand piece. The light source is modulated according to the
frequency that it output by the microcurrent channel A. The brightness of the light source is
dependent on the amplitude of the current.
The light hand piece is to be connected to socket “L” of the BCR Premium MSTU 100.
INFORMATION about Treatment with Light
The selective treatment with light is used to support the treatment with microcurrent. From
practical experience, a positive effect of the light treatment can be derived. However, there
are currently no clinical studies available that prove the effectiveness of light treatment.
Pad Electrodes
General Description
For pad electrodes, the types „Gel-Pad PG470“ and „Gel-Pad PG473“ are available. The
“Gel-Pads“ PG470W and PG473W can also be used. For an optimal success of the
treatment, only these types of pad electrodes may be used.
Dimensions
PG470/PG470W:
35 x 45mm
PG473/PG473W:
45 x 80mm