Connect Windsheild to the
Mask. Use 2 small screws
to tighten.
Connect the Wheel to the
Handle Bars.
Attached the assembled
frontend in to the Body as
shown.
Connect Veiwfinder to
the Mask as shown. Use
2 small screws to tighten.
Repeat for opposite side.
Connect the Handle bars
to the assembled Mask as
shown in the photo. Pull
wires through the square
opening as shown.
Use large bolt to tighten.
Attach Fender to the
Handle Bars. Use 2 small
screws to tighten on the
back.
Attach the wires together
Screw Trunk on the Trunk
Mount using two small
screws.
1
4
7
2
5
8
3
6
9
ASSEMBLY STEPS:
